18
English
5.906-522.0 Rev. 01 (08/11)
몇
Warning
Pull out the mains plug before doing any mainte-
nance or cleaning jobs!
몇
Warning
Never immerse the electrical suction brush in water
or any other liquids while cleaning!
Cut hair and threads that have got wound on the
brush roller using a pair of scissors or just remove
them.
If the rollers of the ESB 28 become difficult to move:
Insert a screw driver into the inlet inclination and
prise out the rollers.
Note
While prising, hold your had over the roller so that the
roller doesn't jump off.
Remove hair or threads that have wound over the
axes of the rollers.
Re-insert the rollers and ensure that both the axes
have locked in properly.
The mechanism for protection against overheating
switched off the motor when it is overloaded, for e.g.
because the brush roller is blocked.
Pull out the mains plug.
Check the brush roller for impurities and remove
any objects that may be blocking its movement.
Allow device to cool down.
Wait for approx. 2 minutes before restarting the appli-
ance.
The mechanism for protection against overheating
switched off the motor when it is overloaded, for e.g.
because the brush roller is blocked.
Check the brush roller for impurities and remove
any objects that may be blocking its movement.
Press the Reset switch.
The status of the attached circuit diagram represents
the creation date of the service manual. This circuit
diagram is not updated. When working on the device,
please always use the current circuit diagram in
Kärcher-Inside.
There are no special tools necessary.
No data.
6
Maintenance and care
6.1
Cleaning the brush roller
6.2
Cleaning the rollers
7
Troubleshooting
7.1
ESB 28
7.2
ESB 34
8
Technical specifications
Appliance type
Appliance no.: Circuit diagram
Operating instructions
Spare parts list
ESB 28
2.640-815.0
–
5.961-284.0
5.970-310.0
ESB 34
2.642-442.0
–
5.963-821.0
5.971-265.0
8.1
Special tools
8.2
Tightening torques
