12
English
5.906-522.0 Rev. 01 (08/11)
1 Fastening screw, casing cover
Unscrew the fastening screws of the casing cover.
1 Covering lid
2 Electronics cover
3 Starter (fluorescent lamp)
4 Fluorescent lamp
5 Release, suction stub adjustment
6 Toothed belt, brush roller drive
Remove the housing cover.
1 Intake, fluorescent lamp
2 Fluorescent lamp
Rotate the fluorescent lamp by 90 degrees and re-
move it toward the front.
Insert the new fluorescent lamp evenly from the
front into both intakes and rotate it by 90°.
Install the casing cover in the reverse order.
Remove the housing cover.
1 Starter (fluorescent lamp)
Rotate the starter counter-clockwise and remove it
from the intake,.
Insert the new starter into the intake and rotate it
in a clockwise direction until it stops.
The starter must be tightly seated in the intake.
Install the casing cover in the reverse order.
5.2
ESB 34
5.2.1 Remove the casing cover
5.2.2 Replace fluorescent lamp
5.2.3 Replace the starter
