New Unit Information 02.2004
Troubleshooting
CV 30/1, CV 38/1
Page 24 / 25
Troubleshooting
Fault
Solution
Motor not running
– Check cable, plug, fuse and socket.
– Thermal contact has switched off the suction motor
because of overheating, leave the suction motor to cool.
Clattering noise when
switched off
– The centrifugal clutch has triggered, check brush for
blocking objects and remove them.
Cleaning result
unsatisfactory
– Check/clean brush head, suction tube and suction hose for
blockage.
– Clean/Replace the dust filter.
– Check/Replace the air outlet filter and protective motor
filter.
– Adjust brush to correct pile height.
– Check the brush for wear (indicator bristles) and replace if
necessary.
Red control lamp lit
– Check/clean brush head, suction tube and suction hose for
blockage.
– Replace dust filter.
