New Unit Information 02.2004
CV 30/1, CV 38/1
Unit functions
Page 9 / 25
Mains connection cable
1 Unit switch
2 Control lamp, filter status
3 Housing for control printed circuit board
4 Clamp for mains connection cable
5 Connection plug
6 Retaining screw for clamp (2x)
7 Mains connection cable
4
6
6
7
3
Replace the mains connection cable
– Pull the connection plug (5) off the unit switch
(1).
– Screw out the retaining screws (6).
– Remove the clamp (4).
– Remove the mains connection cable (7) from
the cable guide.
– Fit new mains connection cable in reverse
order.
2
1
5
