Kärcher BR 45/22 C, Инструкция по эксплуатации

Страница: 24 / 388

– 9
 Clean brush.
 Check the brush for wear and replace if
required (see "Maintenance tasks").
 Charge battery if required.
 Remove the water distribution bar on
the cleaning head and clean the water
channel.
 Clean the fluff filter.
1 Fresh water filter
 Unscrew the cover from the drain open-
ing of the fresh water tank.
 Take out the fresh water filter and rinse
with clean water.
 Check the condition of the seals be-
tween waste water tank and cover, re-
place if required.
 Have the prescribed inspection carried
out by the customer service.
 Compress the fastening devices and
pull the vacuum lips out of the vacuum
bar towards the bottom.
 Remove the vacuum lips from the hold-
er.
Note:
Thanks to the perforation pattern the vacu-
um lips cannot be mixed up. They cannot
be turned and reinstalled.
 Replace vacuum lips.
 Insert the holder with the vacuum lips
into the vacuum bar and snap into
place.
몇
WARNING
Risk of crushing due to the park support
folding in during brush replacement. Turn
the steering wheel 45° to the left before
commencing brush replacement.
 Press the release button for the brush
roller and swivel the brush roller toward
the bottom and pull it off the driver.
 Place the new brush roller on the driver
and lock into place on the opposite side.
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.

DANGER
The removal of the batteries may only be
performed by Kärcher Customer Service or
a specialist.
Classification as whether the batteries are
damaged is done by an authorised Cus-
tomer Service technician
The Chapter "Safety instructions" for han-
dling accumulators must be observed un-
conditionally.
Weekly
Monthly
Yearly
Maintenance Works
Replacing the suction lips
Replacing the brush roller
Maintenance contract
Disposal
Removing the batteries
24 EN