Kärcher BD 50R Classic, Оригинальное руководство пользователя

Страница: 9 / 20

-
7
 Check battery poles for oxidation, brush
off if necessary. Ensure firm seating of
the connection cable.
 Clean the seals between waste water
tank and cover and check for tightness,
replace if required.
 Check the acid density of the cells if the
batteries are not maintenance-free bat-
teries.
 For long periods of disuse, only turn the
device off when the battery is fully
charged. Fully recharge the battery at
least every month.
 Have the prescribed inspection carried
out by the customer service.
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
 Open the cover of the waste water tank.
1 Lock hook
2 Fluff filter
3 Float
4 Swimmer casing
 Detach locking hooks.
 Pull off the float housing in a downward
direction.
 Remove the float from the float housing
and clean it.
 Clean the fluff filter.
 Reassemble the parts in the reverse se-
quence.
 Open the cover of the waste water tank.
1 Coarse dirt sieve
 Pull the coarse dirt filter off in an upward
direction.
 Rinse off the coarse dirt filter under run-
ning water.
 Reinsert the coarse dirt filter into the
waste water tank.
 Remove the vacuum bar.
 Unscrew the star grips.
 Remove the plastic parts.
 Remove the vacuum lips.
 Insert new vacuum lips.
 Insert the plastic parts.
 Screw in and tighten the star grips.
 Lift the cleaning head.

Press the pedal for changing the brush-
es downward beyond its resistance.

Pull the disc brush out of the side below
the cleaning head.

Hold the new disc brush under the
cleaning head, push upward and lock.
In case of danger of frost:

Empty the fresh and dirt water reser-
voirs.

Store the appliance in a frost-protected
room.
Yearly
Maintenance Works
Maintenance contract
Clean the float and fluff filter.
Cleaning the coarse dirt filter
1
2
3
4
Replacing the vacuum lips
Replacing the disk brushes
Frost protection
1.
1.
2.
3.
9 EN