Kärcher B 250 R, Инструкция по эксплуатации

Страница: 24 / 384

-
8
 Turn the program selection switch to
the desired cleaning program.
 Press Info button.
The switch menu is displayed (see "Op-
eration").
 Turn the info button.
The first adjustable parameter is dis-
played.
 Press Info button - the set value blinks.
 Set the desired value by turning the info
button.
 Confirm the changed setting by press-
ing the Info button or wait till the set val-
ue is automatically accepted after 10
seconds.
 Select the next parameter by turning
the Info button.
 After all desired parameters have been
modified, turn the info button until "Exit
menu" is displayed.
 Press the info button - you will exit the
menu.
Changes of the parameters of the individu-
al cleaning programmes that were made
during the operation are reset to the basic
setting after switching off the appliance.
Perform basic setting:
 Turn the info button until "Basic setting"
is displayed.
 Press Info button.
 Turn the info button until the desired
cleaning programme is displayed.
 Press Info button.
 Turn the info button until the desired pa-
rameter is displayed.
 Press Info button - the set value blinks.
 Set the desired value by turning the info
button.
 Press Info button.
Inserting the white Intelligent Key unlocks
the appliance and enables it for the use
with preset parameters.
White Intelligent Keys can be used in a way
that an Intelligent Key with adapted parame-
ters can be created for each cleaning task.
The user cannot change the parameters
and they are independent of the selection
of the cleaning programme on the pro-
gramme selector switch (the functions
"OFF", transport, vacuuming remain un-
changed).
The following parameters for the white In-
telligent Key can be configured by means
of the grey Intelligent Key:
– Driving speed
– Working speed
– Brush speed (only with R cleaning
head)
– Contact pressure
– Water quantity
– RM-Dosing
– Suction
– Work light
– Beacon lamp
– Detergent dosing unit ON/OFF
– Pre-sweeping unit
– Vacuum bar water valve
– the language
 Insert the grey Intelligent Key.
 Turn programme selector switch to
"transport run".
 Press Info button.
 Turn the info button until "key man-
agem." is shown on the display.
 Press Info button.
 Remove the grey Intelligent Key and in-
sert the white Intelligent Key to be pro-
grammed.
 Select the desired menu item to be
modified by turning the Info button.
 Press Info button.
 Adjust the menu item by turning the Info
button.
 Confirm the setting by pressing the info
button.
 Select the next menu item to be modi-
fied by turning the Info button.
 In order to save the settings, call the
"Save?" menu by turning the info button
and then press the info button.
 Turn the info button until "Exit" is dis-
played.
 Press Info button.
 Insert white Intelligent Key.
– The functions "OFF", drive and vacuum
work as usual.
– In all other positions of the programme
selector switch the parameters pro-
grammed on the white Intelligent Key
are active. Different cleaning pro-
grammes can no longer be selected.

DANGER
Risk of injury! When loading or unloading
the machine, it may only be operated on
gradients of max. 15%. Drive slowly.
몇
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
 Remove brushes from the brush head.
몇
CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
 This appliance must only be stored in
interior rooms.
 Select the storage site for the appliance
taking into consideration the permissi-
ble total weight of the appliance in order
not to impact its stability.

DANGER
Risk of injury! Before working on the appli-
ance, remove the Intelligent Key and the
mains plug of the charger.
Pull out the battery plug.
Suction turbine, side brushes and filter
cleaner continue to run for a while after
switching off. Carry out maintenance tasks
only after these components have come to
a halt.
ATTENTION
Risk of damage. Do not sluice the appli-
ance with water and do not use aggressive
detergents.
 Drain off dirt water.
 Check the turbine filter, clean if re-
quired.
 Only BR model: Remove bulk waste
container and empty it.
 Clean the outside of the appliance with
a damp cloth which has been soaked in
mild detergent.
 Clean the vacuum lips and the wiping
lips, check for wear and replace if re-
quired.
 Check the brushes for wear, replace if
required.
 Charge the battery:
If the charging state of the battery is un-
der 50%, charge the battery fully and
without interruption.
If the charging state of the battery is
over 50%, only recharge the battery if
the entire operation duration will be re-
quired when next used.
If the waste water tank is very dirty:
 Remove the vacuum bar.
 Cleaning the filter (optional recycling)
 Unscrew the cover of the cleaning
opening of the waste water tank.
 Rinse the waste water tank with clear
water.
 Clean the edges of the cleaning open-
ing and replace the lid.
 Install the vacuum bar.
Additionally for B 250 RI:
 Pull out both the waste containers and
empty them.
 Check the roller brush and the side
brush for wear, foreign bodies and
wrapped belts
 When used regularly, charge the bat-
tery fully and without interruption at
least once a week.
 Check battery poles for oxidation, brush
off if necessary. Ensure firm seating of
the connection cable.
 Clean the seals between waste water
tank and cover and check for tightness,
replace if required.
 Check the acid density of the cells if the
batteries are not maintenance-free bat-
teries.
 Clean the brush tunnel (only BR model).
 For long periods of disuse, only turn the
device off when the battery is fully
charged. Fully recharge the battery at
least every month.
Standard setting
White Intelligent Key
Programming the white Intelligent
Key
Operation with white Intelligent Key
Transport
BD model
Storage
Care and maintenance
Maintenance schedule
After the work
Weekly
Monthly
24 EN