![background image](http://html.mh-extra.com/html/karcher/3001/3001_operating-instructions-manual_655839015.webp)
K 3001
English
11
Technical specifications
Power supply
230 V
1~ 50/60 Hz
Mains fuse (slow)
10 A
Power (suction turbine) P
max
1400 Watt
P
nom
1200 Watt
Air flow
78 L/s
Vacuum
190 mbar
Capacity, wet vacuuming
11 L
Capacity, filter bag
12 L
Spraying rate
1 L/min
Capacity, fresh water
5 L
Capacity, dirty water
6 L
Length
370 mm
Width
290 mm
Height
470 mm
Weight
approx. 7 kg
Size of accessory connection
35/60 mm
Sound pressure level
72 dB(A)
Protection class
II
Mains cable:
Length
5 m
Type
H 05 VV – F 2x1
Circuit diagram
M1 Suction turbine
S1 Turbine switch
S2 Water level cut-out
M2 Water pump
S3 Water pump switch
C
Interference
suppression capacitor
D
Diode
X1 Plug
H
Warning light - pump
ON
When you have been using the unit for wet
vacuuming:
■
Empty dirt box, and rinse and dry if required.
If you have vacuumed up sticky liquids:
■
Rinse out accessories.
■
Place accessories in holder on cleaner.
■
Wind mains cable and spraying and suction
hose into coils, and wrap them round
accessories.
Note: To release the coupling unit of the spraying and
suction hose, press the two housing parts together
and remove the coupling.
Alfred Kärcher GmbH & Co.
Cleaning Systems
Alfred-Kärcher-Str. 28–40
P.O. Box 160
D-71349 Winnenden
Tel.: ++ 49 71 95 14-0
Fax: ++ 49 71 95 22 12
Alfred Kärcher Kommanditgesellschaft. Sitz Winnenden.
Registergericht: Waiblingen, HRA 169.
Persönlich haftende Gesellschafterin: Kärcher Reinigungstechnik
GmbH.
Sitz Winnenden, 2404 Registergericht Waiblingen, HRB
Geschäftsführer:
Johannes Kärcher, Roland Kamm, Roland Deibler, Dr. Bernhard Graf
Dr. B. Graf
H. Jenner
S. Reiser
EU Declaration of Conformity
We hereby declare that the equipment described below conforms to
the relevant fundamental safety and health requirements of the
appropriate EU Directives, both in its basic design and construction
as well as in the version marketed by us.
This declaration will cease to be valid if any modifications are made
to the machine without our express approval.
Product:
Spray extraction unit
Model:
1.080-xxx
Relevant EU Directives:
EU Machinery Directive (98/37/EEC)
EU Low-Voltage Equipment Directive (73/23/EEC), amended by
93/68/EEC.
EU Directive on Electromagnetic Compatibility (89/336/EEC),
amended by 91/263/EEC, 92/31/EEC, 93/68/EEC.
Harmonised standards applied:
DIN EN 60 335-1
DIN EN 61 000-3-3: 1995
DIN EN 60 335-2-10
DIN EN 55 104: 1995
DIN EN 61 000-3-2: 1995
DIN EN 55 014: 1993
National standards applied:
Appropriate internal measures have been taken to ensure that
series-production units conform at all times to the requirements of
current
EU Directives and relevant standards.
The signatories are empowered to represent and act on behalf of the
company management.