![background image](http://html1.mh-extra.com/html/kapriol/speed-750/speed-750_manual_3449431020.webp)
20
If individual pieces are caught by the saw blade uncontrolled.
Turn off the saw, when you finish one time of cutting.
Make sure the saw is turned off and disconnected from power supply, when you leave the saw.
MAINTENANCE Before switch on
Visual check if distance blade disc blade guard is 1-2mm.
Visual check of power cable and power cable plug for damage.
Daily
Don’t drop the water onto the motor and switch.
Make sure the saw is turned off and disconnected from power supply before clean the saw.
Clean table, tank with brush or soft damp cloth.
Dry the water tank with soft damp cloth or foam after dairy operation.
Clean the water pump with sprinkler, don’t dismantle the water pump.
Monthly
Apply a light coat of oil to guide element: rotating frame, guide rail, up-down thread rail and swivel elements etc.
TRANSPORT
Remove the mains plug before each transport.
Transport the radial tile cutter only when the cutting unit is fixed:
For this purpose, slide the two stops for longitudinal cutting/transport towards each other as far as possible and tighten them.
That’s how you avoid injuries on the hands.
Drain the cooling solution completely before any transport.
A second person is required to assist with the transport.
STORAGE
Remove the mains plug from the socket.
•
Store unused equipment in a dry, locked place out of the reach of children.
•
Before a longer storage observe the following in order to prolongate the service life of the machine and to guarantee a smooth
running operation:
- thoroughly clean the machine
HANDLING, TRANSPORT AND STORAGE OF CUTTING-OFF
WHEELS
Cutting-off wheels are fragile and sensitive to shocks and impacts.
Hence, mind the following points:
•
Prevent the wheel from falling and protect it against sudden impacts.
•
Do not use dropped or damaged wheels.
•
Avoid vibration or shocks during the work.
•
Avoid damages on the locating bore.
•
Avoid any loading of the surface.
•
Store the cutting-off wheels horizontally or vertically in a dry frost-free place at a constant moderate temperature.
•
Store the cutting-off wheels in their original packaging or in special containers and shelves.
GUARANTEE
Please observe the enclosed terms of guarantee.
POSSIBLE FAULTS
Before each maintenance and cleaning work
- switch off device
- wait for complete standstill of the stone cutter
- pull out main plug
After repair and before re-operation control and reactivate all security installations.