EN
safety precautions that have to be observed during equipment utilization, especially: - trailing or
looping of lanyards or lifelines over sharp edges, - any defects like cutting, abrasion, corrosion, -
climatic exposure, - pendulum falls, - extremes of temperature, - chemical reagents, - electrical
conductivity.
• personal protective equipment must be transported in the package (e.g.: bag made of moistu-
re-proof textile or foil bag or cases made of steel
or plastic) to protect it against damage or moisture.
• the equipment can be cleaned without causing adverse effect on the materials in the manufacture
of the equipment. For textile products use
mild detergents for delicate fabrics, wash by hand or in a machine and rinse in water. For energy
absorbers use only a damp cloth to wipe
away dirt. It's forbidden to immerse energy absorbers into the water. Plastic parts can be cleaned
only with water. When the equipment
becomes wet, either from being in use or when due cleaning, it shall be allowed to dry naturally, and
shall be kept away from direct heat. In
metallic products some mechanic parts (spring, pin, hinge, etc.) can be regularly slightly lubricated
to ensure better operation.
• personal protective equipment should be stored loosely packed, in a well-ventilated place,
protected from direct light, ultraviolet degradation,
damp environment, sharp edges, extreme temperatures and corrosive or aggressive substances.
• Using the harness in connection with personal protective equipment against falls from a height
must be compatible with manual instructions of
this equipment and obligatory standards:
- EN353-1, EN353-2, EN355, EN354, EN360 - for the fall arrest systems;
- EN362 - for the connectors;
- EN1496, EN341 - for rescue devices;
- EN795 - for anchor devices.
NOTIFIED BODY FOR EU TYPE EXAMINATION ACCORDING TO PPE REGULATION 2016/425:
PRS – No.1463
Polski Rejestr Statków S.A.
al. gen. Józefa Hallera 126 80-416 Gda
ń
sk, Poland
http://www.prs.pl/
NOTIFIED BODY FOR CONTROL PRODUCTION:
APAVE SUDEUROPE SAS
8 rue Jean-Jacques Vernazza – ZAC. Saumaty-Séon – BP 193
13322 MARSEILLE CEDEX 16
FRANCE - No. 0082