EN
DESCRIPTION:
Work positioning belt is a body holding device intended to be used in fall protection systems
described in EN 363 standard. The belt is intended to prevent a free fall of the user by connecting it by the
work positioning lanyard to an anchor point or to a structure by encircling the lanyard and supporting the
user in tension. The equipment is certified and complying with the standard EN 358 it is equipped with work
positioning belt to be used with work positioning equipment. The belt is tested for a user, including tools and
equipment, with a weight up to 140 kg.
BASIC EQUIPMENT
1. Steel front connecting and adjusting buckle - for comfort wearing and using of the belt
2. steel side attaching buckles - for attaching work positioning system
3. belt pad - suitably formed, ergonomic, made of special foam
4.polyester webbing
5. Identity label
2
3
1
5
4
SIZES
The belt is manufactured in two sizes:
- medium: M-XL (waist size: 85-120 cm)
- large: XXL (waist size: 90-140 cm)
PERIODIC INSPECTIONS:
Work positioning belt must be inspected at least once every 12 months from the
date of first use. Periodic inspections must only be carried out by a competent person who has the knowledge
and training required for personal protective equipment periodic inspections. Depending upon the type and
environment of work, inspections may be needed to be carried out more frequently than once every 12
months. he manufacturer’s inspection can be made by:
- the manufacturer
- or person recommended by manufacturer
- or company recommended by the manufacturer.
During fabric control will be established time of usage till next detailed manufacturer’s control.
MAXIMUM LIFESPAN OF THE EQUIPMENT:
The maximum lifespan of the belt is 10 years from the date
of manufacture.
ATTENTION:
The belt maximum lifetime depends on the intensity of usage and the environment of usage.
Using the belt in rough environment, marine environment, contact with sharp edges, exposure to extreme
temperatures or aggressive substances, etc. can lead to the withdrawal from use even after one use.
WITHDRAWAL FROM USE:
The belt must be withdrawn from use immediately and destroyed when it fails
to pass inspection or there are any doubt as to its reliability.
