Page 19
Page 18
Before installing the LED illuminant, make sure that the hanging lamp is discon-
nected from the electrical circuit by switching off the upstream fuse/the residual
current circuit breaker.
I. Take the new, non-dimmable LED illuminant with a maximum of 5W and put the
centring ring
10
over it, starting from the connections, until it rests on the lower
lamp frame.
II. Put the illuminant
11
and the centring ring
10
into the lid
3
.
III. Push the centring ring
10
over the illuminant
11
tightly and centrally into the lid
3
so that both parts rest at the bottom of the lid
3
.
IV. Take the illuminant unit, consisting of the illuminant
11
, the centring ring
10
and the lid
3
and mount it with approx. ¼ rotation in the lamp carrier
9
.
V. Now push the lamp unit back into the lamp shade
2
and screw the lid
3
tight
without jamming. Check the straight and centred position of the illuminant
11
in the lid
3
.
Replacement of LED illuminant – C: Installation of LED illuminant
