III. Pull the lower part of the lamp cable
7
out of the lower hole of the suspension
4b
until the correct length is reached.
IV. Now pull the upper part of the lamp cable
7
back again through the central
hole of the suspension
4b
. Make sure that the lamp cable
7
is not twisted.
Guide it until it forms a proper arc again at the suspension
4b
.
V. Tighten the cable
7
in the suspension
4b
and position the suspension
4b
parallel to the lower part of the lamp cable
7
.
Page 13
Page 12
Cleaning and care of the hanging lamp BUOY.3000 is limited to its surface. Abso-
lutely no moisture may enter the lamp shade or conducting parts. Before cleaning,
disconnect the hanging lamp from the electric circuit by switching off the upstream
fuse/the residual current circuit breaker.
Use a dry, soft cloth or duster for cleaning.
Persistent stains at the lamp shade may be removed with a slightly moist cloth, if
necessary using a mild, neutral cleaning agent.
Do not use cleaning agents which contain solvents or abrasive or caustic substan-
ces. Avoid pulling at the lamp cable or applying weight to the lamp during cleaning.
Make sure that the hanging lamp is absolutely dry before switching the fuse/the
residual current circuit breaker on again.
Cleaning and care
The lamp flickers.
?
Is the lamp connected to a dimmer?
»
The lamp is not intended for use with a dimmer. Arrange for the dimmer to
be removed from the supply and replaced by a regular switch.
The lamp does not work at all.
?
Is the lamp connected correctly?
»
Arrange for an electrician to check whether the lamp is connected correctly.
?
Is the fuse/the residual current circuit breaker switched off?
»
Switch the fuse/the residual current circuit breaker on.
The LED illuminant does not function any longer.
»
Replace the original Osram LED illuminant by a new, non-dimmable LED illu-
minant with a maximum of 5W. The procedure is described in the following
three chapters.
The new LED illuminant hums.
»
Some replacement LED illuminants may hum. In this case, use a LED illuminant
of a different manufacturer.
Detection of errors - Remedy
