KAPERSKY ANTI-VIRUS - FOR SUN SOLARIS MAIL SERVER, Руководство пользователя

Страница: 191 / 254

I N S P E C T O R
restore the originals). For details about handling new or modified files see
subchapter 12.2.3.
If Inspector fails to disinfect infected files, they are transferred to the
Daemon program.
12.2. Running Inspector
12.2.1. The Program Command Line
Inspector must be started from the command line. The general format of
the Inspector command line is:
./kavinspector [switch1] […] [switchN] [path1] […] [pathN]
where
:
[switchN]
is the optional command line switch of Inspector;
[pathN]
is the location to be checked.
For a complete list of available command line switches refer to
subchapter 15.8 Appendix B.
Before starting your Inspector copy for the first time, it is advisable that you
load the daemon process and specify the switch
–dc
in the Inspector
command line. This is necessary because when started for the first time
your Inspector copy collects data about the location to be checked that is
defined by the command line parameter
[pathN]
and saves this data to the
database. The database is placed in the following four files:
database_name.atom.bin , database_name.htg , database_name.htx and
database_name.node.bin . The data includes information about the file’s
weak points, etc. The data collected the first time is regarded as a master
copy and later all newly collected data will be compared against this copy.
When starting Inspector you must also make sure that the location to be
checked does not contain viruses. By using the switch
–dc
in the Inspector
command line you set the program to transfer all the new files to the
Daemon program where they will be examined.
s[=database_name]
is a mandatory switch in the Inspector command line.
This switch defines the filename where the location details must be saved.
190