Application event log
99
New records entered into Kaspersky Anti-Virus logs are appended to the end of
the newest file. The log size is not restricted.
Kaspersky Anti-Virus logs can be viewed by using the file system.
By default, logs are stored in the Logs folder. This folder is created in the
application's data folder during the installation of the Security Server component.
Any other folder selected by the administrator can be used to store logs (see
section 10.2, page 101).
Kaspersky Anti-Virus logs' settings can be modified in the Diagnostics tab of the
application settings window General parameters (see Figure 39). This window is
accessible via the General parameters link.
10.1.
Configuring the diagnostics
level
For each component of the program, there is a set of diagnostic messages that
will be entered into the logs. The information volume and the extent of detail will
be determined by the diagnostics level selected for the particular group of
messages.
For following diagnostics level are provided:
•
None
-
do not log any information.
•
Minimum
-
log only major events.
•
Medium
-
in addition to major events, log some additional events that de-
scribe the Anti-Virus operation in more detail.
•
Maximum
-
log full information about the operation of the module, except
the debug messages.
•
Debug
-
log all information, including debug messages.
In order to configure the diagnostics level,
1.
Select the node corresponding to the required server in the console
tree and follow the General settings link in the results pane.
2.
Go to the Diagnostics tab in the General settings window that will
open (see Figure 39).