100
Kaspersky Anti-Virus 5.5 for Check Point
TM
Firewall-1
®
Figure 39. The
Diagnostics
tab
3. The
Diagnostics level for system components
section located in
the tab contains a table. The left part of the table contains the list of
all components included into the structure of the program. The right
section of the table displays the groups of the diagnostic messages
for the selected component and the diagnostics level for each of
the groups.
Only diagnostic messages of group
Scan Results
for the
Fil-
ters
component will be entered into the results log.
Messages of this group are not registered in the application's
operation log.
Select the component in the left part of the table and then select
the required group of diagnostic messages in the right part of the
table. Select the desired diagnostics level using the drop-down list.
Specify the required diagnostics level for each program component.
You can select the diagnostics level for all or several components
at the same time selecting components using the <Shift> and
<Ctrl+Shift> keys or using the mouse.