ENGLISH
ENG - 5
Connection
Menu Application
Press the
MENU
button on the remote control unit. You will see the
Main Menu
on the screen.
1. Press the ▲/▼/◄/► buttons to move to sub menu.
2. Press the
OK
button to select or confirm menu.
3. Press the
MENU
button to return to previous menu.
4. Press the
EXIT
button to quit the menu.
1. To Connect Satellite Antenna LNB cable (Diseqc 1.0 /Diseqc 1.2)
Connect the Satellite antenna cable to LNB IN.
2. Loop Through
Connect co-axial cable to the Loop Through on the STB to give signal
to other STB.
3. RS-232
To Connect to PC for software upgrades.
4. 0V/12V
To connect to 0/12V switch.
5. To Connect TV/VCR
Connect RCA cable to the receiver.
6. To connect a external hard disk drive (HDD) for PVR
Connect a external USB hard disk drive (HDD) to USB.
Easy Installation
You will see only Easy Installation menu at first when you plug in your
system.
The Easy Installation gives you the convenience of selecting the language
(Menu, Subtitle & Audio), setting the local time & channel search.
1. Language – Menu, Subtitle & Audio
This option allows you to set the desired language for Menu,
Subtitle & Audio.
2. Local Time Setting
You can set your local time according to your location.
Choose either GMT or your local area time to your preference.
♦
To set the GMT
Select the GMT Usage “
On
.”
At the GMT Offset, press ◄/► buttons to change the time by
30-minute interval.
Note
To set the Summer Time, select “
On
”.
♦
To set the Local Time
Select the GMT Usage “
Off
”
To set the Date and Time, press
NUMERIC
button to select year,
month, day and time.
3. Auto Scan
Select the satellite you want using the ▲/▼ buttons on the satellite
list.
Pressing
RED
button, you can see channel search window.
Note
If auto DiSEq is offered, it will be automatically adjusted.
Note
The design of the Rear Panel may be
changed without any notice in advance.
Made by Kaonmedia
