background image

ENGLISH

2 - ENG

• Always follow these instructions to avoid the risk of injury to yourself or damage to your equipment. 

• Unplug the receiver from the AC power outlet before cleaning.

• Use only a damp cloth for cleaning the exterior of the receiver.

•  Do not use accessories or attachments not recommended by the receiver manufacturer as they may 

cause problems to the equipment and will void the warranty.

• Do not place the receiver on an unstable cart, stand, tripod, bracket, or table. 

• The receiver may fall, causing serious personal injury and damage to the receiver.

• Do not block or cover the slot opening in the receiver.

• These are provided for ventilation and protection from overheating.

• Never place the receiver near or over a radiator or any heat source.

• Do not place the receiver in an enclosure such as a cabinet without proper ventilation.

• Do not stack the receiver on top of or below other electronic devices.

•  The apparatus shall not be exposed to dripping or splashing and with no object filled with liquids, such as 

vases, shall be placed on the apparatus.

• Operate the receiver using only the type of power source indicated on the marking label.

• Unplug the receiver power cord by gripping the power plug, not the cord.

•  Route power supply cord so that are not likely to be walked on or pinched by items placed upon or 

against them. Pay particular attention to the cords that plugs in the convenience receptacles, and the 
point where they exit from the unit.

• Use an outlet that contains surge suppression or ground fault protection. 

•  For added protection during a lightning storm, or when the receiver is left unattached and unused for 

long periods of time, unplug it from the wall outlet and disconnect the lines between the receiver and the 
antenna. This will provide some protection against electrical damage caused by lightning or power line 
surges.

• The mains plug is used as the disconnect device. The disconnect device shall remain readily operable.

Servicing

•  Do not attempt to service the receiver yourself, as opening or removing covers may expose you to 

dangerous voltage, and will void warranty.  
Refer all servicing to authorized service personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : 

To reduce the risk of electrical shock, 

do not remove the cover. No user serviceable parts inside.
Refer any servicing to qualified Service personnel.

Warning

General Safety

Содержание KSF-A3200HR













Отзывы: