Kantech Telephone Entry System, Руководство по установке

Страница: 13 / 42

DN1769-1809 7
Kantech Telephone Entry System Installation Manual
Overview
The Kantech Telephone Entry System enables users to grant access to the building, to their visitors, via their own
telephone line or cellular telephone. This telephone line can also serve, via an integrated modem, as a
programming link and/or a monitoring link. Programmed alarms and troubles can be reported to a pager. The
KTES also supports basic schedule operations for the postal lock supervision, automatic door unlock, automatic
relay activation, pager and dialup reporting.
The KTES is designed to be a stand-alone unit as well as a part of a complete access control system such as
EntraPass from Kantech. The KTES can be connected to a PC via IP or RS-485 or internal PSTN to the phone
line. It can communicate with EntraPass through a Corporate gateway for programming and monitoring. The
KTES installation can also include Kantech controllers (KT-100, KT-300 and KT-400) as well as any controller that
supports a Wiegand interface port.
This manual will describe the installation procedures required to install and power up the KTES. For the
configuration of the KTES, refer to the KTES
Programming Manual , DN1770.
Figure 1: Front Panel Description