Kantech KT-NCC Скачать руководство пользователя страница 38

Страница: 38 / 40

Telephone: 1 (450) 444-2030

•

Toll free: 1 (888) 222-1560

•

Fax: 1 (450) 444-2029

•

Internet: www.kantech.com



•

Specifications may change without notice

page 37 of 39

DN1656

0606

•

Check the option

Obtain an IP Address Automatically

•

Port

18710

is automatically assigned to KT-NCC by default. It is advisable not to modify it.

However, if you have to configure several KT-NCCs, ensure that every KT-NCC has a unique port.
This is necessary when forwarding ports to an IP address.

•

The box

Enable broadcast assignation

is selected by default.

•

Select the option

Public IP address (LAN/WAN)

and enter the IP address corresponding to no. 12 in

the diagram on page 32.

•

Check the option

Use inbound server router

•

Select the appropriate

Communication timing

(Consult Table 2 on page 11).

Click the save icon and close the Gateway dialog.

Verifying the Connection Status

In the application EntraPass Global
Edition - Server, open the List of
connections that is found under the

Connection

tab, and check the

connection status of the KT-NCC
that you just saved.

The next step will consist in configuring
the loops of the system. For this, please
consult Chapter 4 of the

EntraPass

Global Edition

Reference Guide

DN1316.

Содержание KT-NCC









































Результаты поиска

Содержание KT-NCC

Отзывы:

Похожие инструкции для KT-NCC

Бренды по названию

Популярные бренды

Kantech KT-NCC, Быстрое руководство по настройке

Результаты поиска

Содержание KT-NCC

Отзывы:

Похожие инструкции для KT-NCC

Бренды по названию

Популярные бренды