Kantech IP Link, Руководство по установке

Страница: 25 / 37

21
DN1670-1609
IP Link Installation Manual
Configuring the IP Link with the Web Configuration Page
This procedure is practical if you want to configure the IP Link(s) in advance before going on site.
Note: The Web Configuration Page is available only while the IP Link is in Forced Static IP .
Before you start • The detachable Network Configuration Information Sheet is fully completed.
• Determine your connection to the IP Link and choose the appropriate network cable that you need.
See below for an example with each type of network cable.
1. Make sure the IP Link is in Forced Static IP before starting the configuration. Verify the heartbeat
patterns to determine the status, see Table 1 on page 4 and Table 13 on page 26 to put the IP Link
in Forced Static IP .
2. At your computer, change your network connection settings as follows.