Kantech IP Link, Руководство по установке

Страница: 13 / 37

9
DN1670-1609
IP Link Installation Manual
Reserved DHCP IP Addressing
You will use this type of addressing in an environment where the customer DHCP server assigns the IP
address automatically to the IP Link. Since the EntraPass application is at the host site, you must use
the KT-Finder to configure the IP Link.
Pre-Installation
It is important at this stage, if you have not already done so, to contact the Network Administrator
where the IP Link will be installed so that you can complete the
Network Configuration Information
Sheet . We suggest that you always have the Network Configuration Information Sheet close by, and
keep a copy with your IP Link.
Confirm that all parts are in order, all necessary tools are available, and that the site is properly
prepared.
If you are connecting your IP Link to EntraPass, you must make sure that you are running EntraPass
v4.00 or higher.
Network
Configuration • Network Configuration Information Sheet is fully completed
Equipment
Checklist • IP Link
• RS-232 cabling
• Installation Manual
• VC-485 (recommended)
• Network cable
• Network crossover cable for direct connection from PC to IP Link
ESD
Precautions ElectroStatic Discharge (ESD) can damage electrostatic sensitive devices. Use antistatic protection to
avoid the risk of equipment damage.