4.1.1. Connect
1. Connect the Model 2750 monitor to a computer using the cable supplied and turn on
2. Launch the Kanomax Gasmaster PC software and click on the toolbar to search for the
monitor. The unit will be detected automatically and connect
3. Test the connection by clicking on the tool bar. This will display the Monitor Name,
Version and ID Number
4.1.2. Configuration
The Software can be used to set up the
Monitor ID, Location Id, Alarm and Control Limits,
Logging Frequency, Units of Measurement, Output Sensor and Updating the Clock.
•
Click Monitor
Setup (or Ctrl P)
•
The monitor setup dialog box will appear
•
Type in the required values or scroll up or down to set
the desired values.
•
Click the save button to synchronise the monitor
values with those on the PC.
•
In order to data log it is essential that the clock on the
monitor is set to the real time. This can be done on
the monitor (Section 4.4.6.) or via the PC by using the
“Update Clock” button in the configuration menu.
Note: If the temperature and humidity sensor is
connected an option to select temperature unit will
appear
4.2. Data Logging
The Model 2750 monitor can log up to 8188 data points divided by the number of sensors being
logged. For example, if a triple sensor is connected it will log 8188/3 readings. Each sensor uses one
of the records each log period. Refer to Section 3.4.11 for instructions on how to log data on the
monitor itself. Alternatively, data can be logged directly to a PC.
4.2.1. PC Data Logging
Ensure that the USB cable is connected to the monitor and to the PC. Click File
Start PC Data
Logging or click on the toolbar. The data will be logged directly to the database on the PC. No
data will be stored on the monitor memory in this mode of operation. However, if PC data logging is
stopped by clicking on the toolbar the data will start to be stored in the Model 2750 monitor
Page | 15
Kanomax Gasmaster User Guide
MRK-D-0002 V3
