Kannad AF INTEGRA, Руководство по эксплуатации

Страница: 34 / 52

OPERATION MANUAL
AF INTEGRA / AF-H INTEGRA ELT
PAGE: 204
JUN 20/2013
3. ELT transmitter installation procedure
Refer to Figure 2: Installing the transmitter on the bracket page 205
NOTE: Intial installation (bracket installation and first wiring) is described in
Initial installation manual, DOC09081 also supplied with the transmitter.
1. Mount the transmitter on the bracket
• For AF INTEGRA or AF INTEGRA (ER), with "Flight direction" arrow
of the ELT pointed towards the front of the aircraft according to
Section
3. AF INTEGRA / AF INTEGRA (ER), axis of installation page
503 .
For AF-H INTEGRA or AF-H INTEGRA (ER), with "Flight direction"
arrow of the ELT pointed towards the front or downwards the
helicopter according to Section
4. AF-H INTEGRA / AF-H INTEGRA
(ER), axis of installation page 504 .
2. Slide the self-stripping strap through the buckle. Ensure the buckle is
correctly positioned (indifferently on right or left side of ELT)
regarding the horizontal center line of ELT as shown Detail A.
3. Fasten the self-stripping strap tightly.
CAUTION:
AN INCORRECT TIGHTENING OF THE HOOK AND LOOP
FASTENER COULD LEAD TO AN UNSAFE SITUATION BY THE ELT
PREVENTING THE TRANSMISSION OF THE DISTRESS MESSAGE
IMPORTANT:
Once installed in the mounting bracket, the installer must be sure
that the transmitter is firmly attached in its bracket by trying to
extract it manually, thereby verifying there is no play and that it
remains attached when extraction from the bracket is attempted.