34
6.1.11 Set SMarT Check
The Set SMART Check option allows you to configure whether the system runs a SMART check
before starting a copy process. You can configure what level of SMART check is performed through
the SMART Warning option.
Tap the
‘ENT’ button
to change this option’s setting.
•
[ ]
– Set SMART Check is disabled (default). The duplicator will not check the Source’s
SMART monitoring information before a copy process.
•
[
٭
]
– Set SMART Check is enabled. The duplicator will check the Source’s SMART monitoring
information before a copy process.
6.1.12 SMarT Warning
If Set SMART Check is enabled, you can configure what level of SMART check performed. There
are 3 levels of SMART checking:
•
[ 0 ] - Level 0: Checks for critical, uncorrectable errors (e.g. read/write errors)
•
[ 1 ] - Level 1: Checks for any major errors that could force the drive to stop working.
•
[ 2 ] - Level 2: Checks for any warning status errors that could force the drive to stop working.
6.1.13 Show ExE Time
The SHOW EXE TIME option allows you to enable or disable whether the total execution time for
an operation is displayed on the LCD screen. The total execution time will be displayed after an
operation has completed.
Tap the
‘ENT’ button
to change this option’s setting.
•
[ ]
– Disabled (default). The total execution time is not displayed.
•
[
٭
]
– Enabled. The total execution time is displayed.
The Setup Menus
