17
3. Once all connected disks have been detected and initialized, the duplication process begins.
During duplication the screen will display the following information:
brIEF CoPy 7
250.0G
5 60.96G 25% 109Mb/s
Total amount of data
Target drive indicator
Data processed
Number of target drives
Transfer rate
Current operation
Progress indicator
WarNING!
Do not disconnect any drives while they are in use. You can tell if a drive is in
use if the LED next to it is blinking. Wait for a solid green or red LED before disconnecting a
drive. If you want to cancel the current process, press and hold the
‘ESC’ button
and wait for
a solid red LED to come on.
4. When the copy process has completed, you will receive a message saying “Remove xPS xFL”,
where “x” indicates the number of drives that passed (PS) and failed (FL). Target drives that
passed will have a green LED displayed next to it. Target drives that failed the duplication
process will display a red LED next to it.
5. Tap
the
‘ENT’ button
to return to the Main menu.
Note:
The duplicator will keep a running count of the number of passed and failed drives until
you change copy modes.
brIEF CoPy 0
7 PaSS
0 FaIL
General Operation
