Kango K 350, Инструкции по ремонту

Страница: 6 / 17

5
PAGE
Repair Instructions
K 350
Removing the
angle drive
1
Remove the locking washer (67).
2
Remove the shaft (82) together with the
discs (72 & 73) and the ring (71). (If nec-
essary by hitting the gear box lightly with a
plastic hammer).
Note: Depending on the tolerance of the
bearing, the tool can be equipped with the two
or three discs (72 &73). Note the numbers of
the discs and use the same number when re-
assembling.
Removing the
motor cover
1
Remove the four bolts (85) and remove
the protective cap (8).
Dismantling
the handle
1
Remove the pin (4).
2
Disconnect the field supply cables (18,19)
from the contacts and pull them from the
field housing.
3
Remove the attaching screws (85) and the
handle cover (86).
4
Remove the silicone buffer (12).
5
Remove the locking ring (6) and the wash-
er (5).
6
Remove the AVS-rubber (87).
7
Remove the handle (86).
8
Unscrew and remove the handle bolt (68).
72
67
82
71
66
73
11
8
85
12
85
86
87
5
6
68
4
1
8
27
12
86
18,19
13