Kango K 350, Инструкции по ремонту

Страница: 14 / 17

13
PAGE
Repair Instructions
K 350
Mounting the
back gear shaft
and the cylinder
1
Insert the two disks (42) and the bolt (41)
into the cylinder (40).
☞
Replace the hoop (43) with two wash-
ers (42).
2
Insert the rolls (87)/(90) into the back gear
shaft one after the other and fix it with
grease.
☞
Mount the rolls (87) completely with the
cage (from date of manufacture 09/97).
3
The back gear (35) can only be inserted
as follows:
– Put together the cylinder and the back
gear for adjustment before mounting
them.
– Turn the tumble drive to the lowest posi-
tion and leave it there
– Insert the cylinder into the end shield
– Insert the tumble drive into the mounted
cylinder.
4
Grease the striker (39) and insert it into
the cylinder.
Assembling the
spindle
(mounting the
inner parts)
1
Push the O-rings (87) into the sleeve.
2
Fit the sleeve (59), the O-ring (87), and the
sleeve (54) to the snap die (57) and insert
them into the spindle (46).
3
Insert the disk (55) into the spindle upto
the O-ring.
4
Press the locking washer (53) with a suit-
able sleeve into the spindle (46) until the
locking washer (53) engages.
Caution: Check the service boring (visual
check) to make sure the locking ring (53)
has engaged.
08/96 08/96
09/97
70
42
41
40
39
35
43
87(90)
10
54
59
46
87
57
55
87
53
09/97
11