WINDOWS
Cut the windows around the outside flange.
Carefully trim them down until they are 1/8-
inch larger then the window opening.
When satisfied with the fit, apply a very thin
bead of canopy adhesive to the flange.
Position the window in the fuselage, tape in
place and allow to dry. Repeat the process
for all the windows.
Trim the windshield at the indicated line.
Position it on the fuselage and make any
adjustments to its size for best fit.
Temporarily tape in place.
Make a couple of index marks on tape to
help with alignment and remove.
Apply a thin bead of canopy adhesive
around the windshield 1/8-inch from the
edges. Position the windshield carefully
using the index marks and tape the entire
perimeter until dry.
WINGS
The control surfaces on the Monocoupe are
hinged at the top; this makes the assembly
different from what you may be accustomed
to. Please follow the instructions for the best
result.
Remove the hinges and fold them in half as
shown, the fold should be sharp.
Locate the pre-cut slots for the hinges.
Notice the angle they are cut into the
surfaces.
13
