KANG Industrial VS-300, Руководство по эксплуатации

Страница: 4 / 26

4
III. SPECIFICATION
Item No. 388200 388201 388202 388203
Model VS-300 VS-400 VS-500 VS-585
Max.Cutting
capacity
Height 185mm(7.3
”)
285
mm(11.2”) 310mm(12.2”) 336mm(13.2”)
Width 310mm (12.2
”) 400mm (15.7”) 500mm(19.7”) 585mm(23”)
Table Size
500x400mm
(19
.7”x15.7”)
550x600mm
(21.7”x23.6”)
660x700mm
(26”x27.6”)
660x700mm
(26”x27.6”)
Blade
Speed(50Hz)
10-180m/min 15-260m/min 15-328m/min 15-328m/min
Length of
saw blade
2835-2915mm 3390-3467mm 3980-4050mm 4430-4520mm
Blade width 3-16mm 3-16mm 3-16mm 6-19mm
Table tilt R 45
°
, L 15
°
R 45
°
, L 15
°
R 30
°
, L 15
°
R 30
°
, L 15
°
Main motor
Grinder
motor
0.55Kw(2HP)
0.09Kw(1/8HP)
1.5Kw(2HP)
0.09Kw(1/8HP)
1.5Kw(2HP)
0.09Kw(1/8HP)
1.5Kw(2HP)
0.09Kw(1/8HP
)
Electric
welder
2.4KVA 2.4KVA 2.4KVA 2.4KVA
Packing Size 96x65x175cm 108x80x200cm 140x90x220cm 147x95x230c
m
N.W./G.W. 275/345kg 310/380 kg 484/548 kg 555/640kg
IV. DESCRIPTION OF THE MACHINE AND ITS COMPONENTS
The band sawing machine produced by us has a sturdy frame made from welded and
painted sheet-steel. The upper surface is designed to allow the complete draining away of
the cutting fluid. The band holding bow is made of cast-iron and has generous dimensions
，
providing the cutting unit with the necessary strength and precision. The vice unit is made
of cast-iron and clamps the material to be cut securely. The bar-stop device allows the
length required to be preset and a constant level of performance for repeated cuts. The
blade-holding bow is firmly attached to a reduction unit built onto the motor and to the base
by means of a joint which allows 60° rotation to the right. This joint also allows the cutting
movement to advance manually or by falling.
Tank is fitted near the machine table. The main switch is located on the front panel. The
choice of one of the two motor rotation speeds and therefore cutting speed is carried out by
the main switch. The front panel is also fitted with an emergency stop button and a START