KANG Industrial VS-300, Руководство по эксплуатации

Страница: 6 / 26

6
ACTION TAKEN
A. Power
1. First, before operating the machine, be sure to check the voltage which is in accordance
with the power supply system.
B. Sawing Material Selection:
Before sawing, the operator must fully understand the quality of the sawing material.
Example: With super high stencil steel, the machine should be run at a slower speed.
Otherwise, the blade will overheat, be worn or broken easily. With thin material, it is
recommended to use a wider blade pitch at high speeds; otherwise, the teeth will be ruined
easily.
C. Blade Selection:
1. Generally, there are three different types of blade. These are used for metal materials
such as steel, brass, iron and aluminum or non-metal such as wood, plastic, rubber and
paper materials.
2. Selection of the blade pitch is essential. As a general rule, the thicker the material the
less teeth per in pitch, and a wider blade should be used.
3. When cutting ‘Radius’ – the smaller the ‘Radius’ the narrower the blade.
4. Refer to the Speed & Pitch Selector guide on the machine for proper radius and pitch.
D. Blade cutting Device: Use the Blade cutter only for cutting blades if you want to
maintain the cutter for a long period of time. Do not use it as a general purpose cutter.
E. Welder: Reference as the following
1. Prepare before welding
a. Cleaning the blades and cut the two ends straight with the cutter. Use grinding wheel
deburring the ends if necessary.
b. Put the blade ends on the clamping points separately, and make sure the two ends
contact closely. Then, turn the clamping handles to outsides and lock the electrode
to blades.
c. Adjust voltage knob according to the blade thickness. The more thickness, the
higher voltage (Turn the knob clockwise for higher voltage). The normal setting is 4