4K/60 2x1 Wall Plate Switcher & Extender Set
8
③
RS232:
3-pin terminal block to connect a control device (such as PC) to send RS232
command to control this unit, or to connect a third party device which needs to be
controlled by RS232 pass-through. For more details, please refer to the
on the page 11.
3.3
Receiver Front Panel
①
POWER LED:
The LED illuminates red when power is applied.
②
ON LED:
The LED blinks green when the receiver is in the working status.
③
LINK:
The LED illuminates green when the receiver is successfully connected to
the transmitter are by a CATx cable.
④
HDCP LED:
⚫
The LED illuminates green when the HDMI signal is transmitted with HDCP.
⚫
The LED blinks green when the HDMI signal is transmitted without HDCP.
⚫
The LED turns off when there is no HDMI signal input.
⑤
FW:
Micro-USB port for firmware upgrade.
1
2
3
4
5
