4K/60 2x1 Wall Plate Switcher & Extender Set
6
3. Panel Description
3.1
Transmitter Front Panel
①
POWER LED:
The LED illuminates red when power is applied.
②
LINK LED:
The LED illuminates green when the transmitter is successfully
connected to the receiver are by a CATx cable.
③
HDCP LED:
⚫
The LED illuminates green when the HDMI signal is transmitted with HDCP.
⚫
The LED blinks green when the HDMI signal is transmitted without HDCP.
⚫
The LED turns off when there is no HDMI signal input.
④
SOURCE SELECT:
Press the button to select the next input source, or press and
hold it at least 3 seconds to enable auto-switching mode. For more details, please
on the page 10.
⑤
DISPLAY ON/OFF:
Press the button to turn on/off the display. For more details,
please refer to the
on the page 10.
⑥
TO PC:
Type-B USB port to connect a PC or other device needs to be controlled.
⑦
HDMI IN 1 LED:
The LED illuminates orange when the
HDMI IN 1
port is
connected to a source device, and it will turn green once the device is selected as
LINK
RESET
FIRMWARE
HDMI IN 1
HDMI IN 2
TO PC
SOURCE SELECT
DISPLAY ON/OFF
2
1
3
4
8
10
12 11
7
9
5
6
