4K/60 2x1 Wall Plate Switcher & Extender Set
11
5. Button Control
5.1
Signal Switching
1)
Press the
SOURCE SELECT
button to switch to next source device, and then the
corresponding input LED will turn green.
2)
Press and hold the
SOURCE SELECT
button at least 3 seconds to enable auto-
switching mode, and it abides by the following principles:
⚫
New input:
Once a new input signal detected, the transmitter will automatically switch to this
new signal.
⚫
Signal removing
Once removing the current display signal, the transmitter will automatically switch to
another active HDMI input.
⚫
Rebooting device
The transmitter can save the last configuration before losing power. If the last
switching mode is auto-switching, the transmitter will automatically enter auto-
switching mode once rebooted, then detect all inputs and memorize their
connection status for future rebooting using. If the last selected input source is still
available, the transmitter will switch to this input. Otherwise, it will switch to the first
available active input source starting at
HDMI IN 1
.
⚫
Exit auto-switching mode
The input source would remain the same when press and hold the
SOURCE
SELECT
button again to exit the auto mode.
5.2
Display Control
1)
Press the
DISPLAY ON/OFF
button to turn on/off the display.
2)
The
DISPLAY ON/OFF
can be customized by sending RS232 commands for
compatibility with various displays. For more details, please refer to the
on the page 16.
