KanexPro MX-HDBT8X818G, Руководство пользователя

Страница: 9 / 16

MX-HDBT8X818G
6
② At display end: The matrix has two location HDMI outputs and six HDBT outputs. The location HDMI output
has not IR control function. The six HDBT outputs connect HDBT receiver. The HDBT IR INPUT and the matrix IR
OUPTU is match. The way of IR control is following video switch to change.The mean is that the output select
corresponding input source, the IR control will switch to following output select corresponding input source.
IR BLASTER (TX)
To control the source: Plug IR Blaster into IR OUT port of transmitter unit; place blaster in front of the IR eye of
the source.
To control the display: Plug IR Blaster into IR OUT port of receiver unit; place blaster in front of the IR eye of the
display.
IR RECEIVER (RX)
To control the source: Plug IR Receiver into IR IN port of receiver unit; place
receiver at or near display.
To control the display: Plug IR Receiver into IR IN port of transmitter unit; place
receiver in position where it is able to receive remote signals.
8. Web
GUI
User
GUIDE
The Matrix can be controlled via Web GUI through LAN port. You must know current Matrix IP address. The static
IP address is 192.168.1.100. You can connect PC Web GUI through dynamic IP adress. In this unit, you can get the
IP address via PC Controller. Firstly, opening Matrix PC Controller software, as following page: