KanexPro MX-HDBT8X818G, Руководство пользователя

Страница: 6 / 16

MX-HDBT8X818G
3
4 POWER button Device power button. Press the button 3s, the
unit will enter standby mode and press again
the unit will work.
5 OUTPUT button A~H output channel button.
5.2 Rear Panel
Number Name Function description
1 IR INPUT IR INPUT interface. For further details, please refer to the IR control
system introduction.
2 EXT If the panel sensor is obstructed or the unit is
installed in a closed area out of infrared line of sight, the IR receiver
included can be inserted into the EXT port at the rear to extend the IR
sensor range and enable local control of the matrix.
3 IR OUTPUT IR OUTPUT interface. For further details, please
refer to the IR control system introduction.
4 Audio OUTPUT De-embedded audio output ports. By default, it
outputs HDMI out A audio. But user can select other output ports
audio via Web GUI.
NOTE: Optical port can support PCM and compressed
audio formats, but L/R port only supports PCM audio.
5 CONTROL LAN This port is the link for TCP/IP control, connect to an
active Ethernet link with an RJ45 terminated cable.
RS-232 Connect to a PC or control system with phoenix jack
for transmission of RS-232 commands.
6 GND Connect the Housing to ground.
7 HDMI INPUT Connect to the HDMI input source devices such
as a DVD player or a Set-top Box with HDMI cable.
8 HDMI/HDBaseT
OUTPUT
The HDMI OUTPUT connect to HDMI equipped TVs or monitors and the
HDBT OUTPUT connect to the HDBT Receiver.
9 AC POWER INPUT Connect to AC power with AC power cable.