KanexPro MX-HDBT8X818G, Руководство пользователя

Страница: 2 / 16

MX-HDBT8X818G
DISCLAIMERS
The information in this manual has been carefully checked and is believed to be accurate. KanexPro
assumes no responsibility for any infringements of patents or other rights of third parties which may
result from its use.
KanexPro assumes no responsibility for any inaccuracies that may be contained in this document. KanexPro
also makes no commitment to update or to keep current the information contained in this document.
KanexPro reserves the right to make improvements to this document and/or product at any time and
without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or
any of its part translated into any language or computer file, in any form or by any means — electronic,
mechanical, magnetic, optical, chemical, manual, or otherwise — without express written permission and
consent from KanexPro.
© Copyright 2018 KanexPro. All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be trademarks of the companies with which
they are associated.
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may be damaged by electrical spikes, surges,
electric shook, lighting strikes, etc. Use of surge protection systems is highly recommended in order to
protect andextend the life of your equipment.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate this equipment and before
connecting the power supply.
Please keep the following in mind as you unpack and install this equipment:
•
Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
•
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
•
Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings or empty slots in the unit,
as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.