KanexPro HDMX42-18G, Инструкция по эксплуатации

Страница: 13 / 27

HDMX42-18G
COMMAND DESCRIPTION AND PARAMETERS
EDIDIN N1 N2 Set the EDID to use in “Appoint” mode. N1 =
1~4 [Input number]
Available values for N2: 0
[SINK A]
1 [SINK B]
2 [720P]
3 [1080P]
4 [4K_3G]
5 [4K_Y420]
6 [4K_6G]
EDIDIN N1 Show the current EDID selection for input N1
in “Appoint” mode.
EDIDIN
Show the current EDID selections for all inputs
in “Appoint” mode.
FADEFAULT Reset the unit to the factory defaults.
REBOOT Reboot the unit.
VER Show the unit’s current firmware version.
IPCONFIG Show the current IP configuration.
SIPADDR N1 Set the static IP Address.
N1 = X.X.X.X [X = 0~255]
SNETMASK N1 Set the Ethernet netmask.
N1 = X.X.X.X [X = 0~255]
SGATEWAY N1 Set the Ethernet gateway.
N1 = X.X.X.X [X = 0~255]
HTTPPORT N1 Set the HTTP port.
N1 = 0~65535
TELNETPORT N1
Set the Telnet port.
N1 = 0~65535
8