KanexPro HDMX42-18G, Инструкция по эксплуатации

Страница: 15 / 27

HDMX42-18G
4.7 Telnet Control
Before attempting to use Telnet control, please ensure that both the unit and
the PC/Laptop are connected to the same active networks.
To access Telnet in Windows 7, click on the “Start” menu and type “cmd” in the
search field, then press “Enter”. Under Windows XP go to the “Start” menu, click
on “Run”, type “cmd” then press “Enter”. Under Mac OS X, go to
“Go→Applications→Utilities→Terminal”. See below for reference.
Once in the CLI (Command Line Interface) typ e “Telnet” followed by the IP
address of the unit and “23”, then hit “Enter”.
This will connect us to the unit we wish to control. Type “help” to list the available
commands.
Notes:
•
Commands will not be executed unless followed by a carriage return.
Commands are not case-sensitive.
•
If the IP address is changed then the IP address required for Telnet access will
also change accordingly.
10