Page 24
the connector and switch. Follow the cleanser manufacturer’s
instruction.
After cleaning leave in a warm dry place for enough time for all the
cleanser residue to evaporate before re-applying power to the instrument
The Handset materials: PC – ABS with a rubber over-moulding.
7.5: Batteries
CAUTION!
THE BATTERY MODULE SHOULD NEVER BE REPLACED WITH
ANYTHING OTHER THAN AN ORIGINAL KANE BATTERY MODULE.
SERIOUS INJURY MAY RESULT.
7.5.1How to remove the Smokemeter’s battery module
Turn the Smokemeter on its side on a suitable surface and unscrew the
four screws.
Note: These screws are not captive.
The battery pack’s connector is a locking connector and it must be
unclipped prior to disconnection.
Note: The battery pack’s connecting cable is positioned at the right
hand side of the main case when viewed from the side facing the
three LEDs.
