![background image](http://html1.mh-extra.com/html/kandm/ds400/ds400_user-manual_3058157012.webp)
11
Note4:
In the Mode of
STANDARD
, and select
PLC
as the IO type, before start, this
port amplitude will be switched to Shake-off amplitude (Amplitude Segment C) .
Select “Key” as the IO type, and select “Grounding” as the work mode, this port is
used as Grounding Input.
(
when Grounding hold time is off, the ultrasonic stops, and when Amplitude
Segmentation is enabled, the amplitude will be switched to amplitude Segment B.
In the Mode of AUTO
,
select “PLC” as the IO type, this port will trigger ultrasonic
immediately. Select other IO types, “Grounding” work mode, this port is used as
grounding input.
Note 5:
In the Mode of STANDARD, The port can drive the Solenoid (24V/5W)
directly, and control blowing for cooling , and in the Mode of AUTO, this port can
drive cylinder movement. This port can be used to drive the solenoid (24V/3W)
directly.
Note 6:
In the Mode of AUTO, when select ‘Ready A’ function, Ready A output is
enabled(such as control of protection film roller motors) .
Note7:
It means malfunctions, such as wrong parameter setting, abnormal
communications or overheated. In this case, the machine has to be reset.
In the Mode of AUTO, when select ‘Ready B’ function, Ready B output is enabled
(such as control of the clamping action by the solenoid).
In the Mode of AUTO, when select
‘end action’
function, it is enabled to end the
action such as mould retreating controlled by solenoid. The port will automatically
switch to ‘H.F’ or ‘ERROR’.
Note 8:
When it is not convenient to connect to the common port for input or
output, this port can be used for connection, as this port is connected internally with
the common port.