KANDA STK300, Руководство пользователя

Страница: 13 / 45

Page 13
Menu and Option Descriptions
File Menu
Load Select memory area/buffer window to load (Flash or EEPROM), then
open the Intel Hex file in the Open File dialog box. A red status
warning light indicates that the file load was unsuccessful. This may
be because the file is not Intel Hex or it is too large for the selected
buffer/memory.
Save Saves the contents of the buffer selected (Flash or EEPROM) to file.
Choose a filename in the File Save dialog box that appears.
Reload Reloads the buffer (Flash or EEPROM) with the last file opened.
Exit Quits the program. Standard Windows close choices can also be used
to exit the program.
Device Menu
Erase The whole device is erased.
Program The selected device memory, fuses or lock bits are programmed
Read The selected device memory or fuses are read
Verify The selected device memory is verified against the buffer contents
Fuses This is available if the software and device support this function
Run Runs the program downloaded to the device on the board.
Auto Program All operations selected in the Auto Program Options are carried out
Auto Program
Options Dialog box to set required programming operations that will be carried
out sequentially when Auto Program is pressed.
Programmer Menu
Options Dialog box for port selection, read/write timeouts and voltages (1.8 -
5V). You must choose Parallel or Serial port operation and the correct
device first.
Note : Most parts program at 5V even if they are low
voltages for operation.
Information Shows information about the programmer state e.g. hardware
detected, which port etc.
View Menu
Flash The Flash Memory Buffer window is displayed.
EEPROM The EEPROM Memory Buffer window is displayed.
Status The Status Window is displayed. This lists all operations, error
messages, and status information that have been posted during this
session.
See also Window selection on the next page.
Help Menu
Readme Displays the latest information on the software and devices in the
Status window.
About Version and Program information