Kamstrup ULTRAFLOW 54 DN150-300 Скачать руководство пользователя страница 60

Страница: 60 / 62

TECHNICAL DESCRIPTION

ULTRAFLOW® 54 DN150-300

Kamstrup A/S

Technical description

5512-876_M1_GB_12.2020

Disposal

Kamstrup A/S holds an environmental certification according to ISO 14001, and as part of Kamstrup

’s

environment policy,

materials that can be recovered environmentally correctly are used to the greatest possible extent.

Kamstrup A/S has climate accounts (Carbon footprint) for all meter types.

•

Disposal by Kamstrup A/S

Kamstrup A/S accepts worn-out meters

for environmentally correct disposal according to previous agreement. The

disposal is free of charge to our customers, except for the cost of transportation to Kamstrup A/S.

•

The customer sends for disposal

The meters must not be disassembled prior to dispatch. The complete meter is handed in for approved national/local
disposal. Enclose a copy of this page in order to inform the recipient of the contents.

Lithium cells and meters including lithium cells must be forwarded as dangerous goods (see Kamstrup document 5510-

408, ”Lithium batteries

Handling and disposal”

Meter part

Material

Recommended disposal

Lithium cell (D-cell)

Lithium and thionyl chloride



3091



D-cell: 4.9 g lithium

Approved deposit of
lithium cells

PCB

Coppered epoxy laminate,
components soldered on

PCB scrap for concentration
of metals

Signal cable for flow sensor

Copper with silicone mantle

Cable recycling

Supply cable

Copper with PVC mantle

Cable recycling

Electronics box, base & cover

Thermoplastic, PC 10% GF

Plastic recycling

Mounting fitting, distance piece
for electronics box

Thermoplastic, PPS 40% GF

Plastic recycling

Housing, Cable Extender Box

Thermoplastic, ABS

Plastic recycling

ULTRAFLOW® sensor housing

Stainless steel, W.no. 1.4307

Metal recycling

Transducer holder

Stainless steel, W.no. 1.4308

Metal recycling

Transducer

Titanium

Metal recycling

Packing

Recycled cardboard and EPS

Cardboard and EPS recycling (Resy)

Please send any questions you may have regarding environmental matters to:

Kamstrup's heat meters are marked according to EU Directive 2012/19/EU and
the standard EN 50419.

The purpose of the marking is to inform our customers that the heat meter
cannot be disposed of as ordinary waste.

Kamstrup A/S

Att.: Quality and environmental dept.

Fax: +45 89 93 10 01

[email protected]

Содержание ULTRAFLOW 54 DN150-300































































Результаты поиска

Содержание ULTRAFLOW 54 DN150-300

Отзывы:

Похожие инструкции для ULTRAFLOW 54 DN150-300

Бренды по названию

Популярные бренды

Kamstrup ULTRAFLOW 54 DN150-300, Техническое описание

Результаты поиска

Содержание ULTRAFLOW 54 DN150-300

Отзывы:

Похожие инструкции для ULTRAFLOW 54 DN150-300

Бренды по названию

Популярные бренды