![Kamstrup MULTICAL 801 Скачать руководство пользователя страница 6](http://html1.mh-extra.com/html/kamstrup/multical-801/multical-801_installation-and-user-manual_3387757006.webp)
6
Kamstrup A/S • 5512603_C1_GB_03.2016
MULTICAL® 801
1
General information
Please read this guide before installing the energy meter.
If the meter is installed incorrectly, Kamstrup’s warranty obligations
will no longer apply.
Please note that the following installation conditions must be obeyed:
- Pressure stage ULTRAFLOW®: PN16/PN25/PN40, see marking. Marking
of flow part does not cover included
accessories.
- Pressure stage Kamstrup
sensor set type DS:
PN16
- Pressure stage Kamstrup
pocket sensors type PL:
PN25/PN40 - depending on type
If the medium temperature exceeds 90 °C we recommend using flange
meters.
Please make sure that MULTICAL® 801 is connected to correct voltage, either
230 VAC or 24 VAC. See the marking at terminals 27 and 28 at the bottom
left.
MULTICAL® 801 must be sealed with seal and wire or a sealing label after
mounting.