19
Kamstrup A/S • 5512603_C1_GB_03.2016
MULTICAL® 801
8.6
Prog. data RTC + 4…20 mA pulse inputs,
type 67-00-22
The module has connection possibility for two pressure transmitters on
terminals 57, 58 and 59 and can be adjusted for current reading or pressure
range 6, 10 or 16 bar.
The module is prepared for remote reading, data from meter/module being
transferred to the system software via the external GSM/GPRS modem
connected on terminals 62, 63 and 64.
Furthermore, the module has two extra pulse inputs, VA and VB.
The module must be powered by 24 VAC.
8.7
Lon Works, type 67-00-24/67-0Y
Re mounting of Lon Works type 67-00-24, see installation guide 5512-396
(DK) or 5512-403 (GB).
8.8
Wireless M-Bus, type 67-00-30/67-00-31/67-00-35/67-00-38
The radio module has been designed to form part of the hand-held Wireless
M-Bus Reader systems of Kamstrup A/S at license-free radio frequency (868
MHz).
The module fulfils the C-mode specifications of prEN13757-4 and can thus
form part of other systems using Wireless M-Bus C-mode communication.
The radio module comes with internal antenna and external antenna
connection as well as two pulse inputs, which are identical with the
previously described pulse inputs.
The Wireless M-Bus radio transmitter is switched off on dispatch from the
factory. It turns on automatically when one litre of water has run through the
meter. The radio transmitter can also be switched on by means of a forced
dial-up to the meter (keep both front keys pressed for approx. 5 s. until CALL
is displayed).
8.9
ZigBee® + pulse inputs, type 67-00-60
The ZigBee® module is used for wireless communication and can form part
of a remote reading system, in which several units can communicate with
each other.
The pulse inputs of this module are identical with the previously described
pulse inputs.
The ZigBee® module requires mains supply.
