7
Kamstrup A/S • 5512850_D1_GB_01.2016
MULTICAL® 402
2.1 Direct sensors
The short, direct sensors up to DN25
can be mounted in special ball
valves with built-in M 10 socket for
the short direct sensor. They can
also be mounted in installations
with standard angle tee-pipes.
Kamstrup supply R½ and R¾ brass
nipples, which fit our short, direct
sensor. The short direct sensor
can also be direct mounted in all
Kamstrup flow sensors with G¾B
and G1B thread on the meter case.
Fasten the sensors’ brass unions
lightly (approx. 4 Nm) using a 12 mm
face wrench and seal the sensors
with seal and locking wire.
