14
Kamstrup A/S • 55123307_A1_EN-US_06.2022
Installation guide flowIQ® 4200
6 ICES/ISED cautions
English:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Complies with the Canadian ICES-003 Class B specifications.
This device complies with RSS 247 of Industry Canada. This Class B device meets all the
requirements of the Canadian interference-causing equipment regulations.
This radio transmitter IC ID 22376-KWM4220 has been approved by Innovation, Science
and Economic Development Canada to operate with the antenna types listed below, with
the maximum permissible gain indicated. Antenna types not included in this list that
have a gain greater than the maximum gain indicated for any type listed are strictly
prohibited for use with this device.
This equipment has been approved for fixed operation, and unless otherwise advised
in separate supplemental instructions for individual wireless transmitter(s), requires
minimum 25 cm spacing be provided between antenna(s) and all person’s body
(excluding extremities of hands, wrist and feet) during wireless modes of operation.
Maximum gain:
Antenna type
450-470 MHz:
902-928 MHz:
Helix
-2.9 dBi
-2.1 dBi
PIt, small
-5.3 dBi
1.2 dBi
Wall
0.5 dBi
-1.6 dBi
Must be installed to provide a separation distance of at least 25 cm from all persons.