Kamstrup flowIQ 3100 Series Скачать руководство пользователя страница 10

Страница: 10 / 68

TECHNICAL DESCRIPTION flowIQ® 3100

Kamstrup

A/S • Technical Description •

5512-1242_N

1_GB •

10.2019

1.4

ealing

The meter is sealed diagonally as shown.

Approval

The water meter has been approved for the European markets acc. to the Measurement Instruments
Directive (MID) based on

OIML R49 with the with

‘FORCE Certification’

as notified body.

OIML: ‘International Organization of Legal Metrology’)

Please contact Kamstrup A/S for further details on national approvals and verification.

Approval cert. no.

DK-0200-MI001-017 (up to

63 m³/h)

DK-0200-MID-01858 (Applies to DN100)

EU-directives

MID (Measuring Instrument Directive 2004/22/EC, MI-001)

LVD (Low Voltage Directive 2014/35/EU)

EMC (The Electromagnetic Compatibility Directive 2014/30/EU)

Standard

Wired M-Bus version:

EN 13757CE approval

Wireless M-Bus:

EN 13757-4. European standard for remote

reading of meters

Sigfox radio:

zone 1 (868 MHz)

Drinking water approvals DVGW W 421, KTW, W270, ACS, ÖVGW, Belgaqua, SVGW, WRAS

SCU, PZH, other hygiene approvals.
For type (DN100 type 3E) : KTW,W270,Belgaqua, ACS

ATEX approval

According to 2014/34/EU (equipment intended for use in potentially
explosive atmospheres, zone 2)

Security seal
(sealing ring)

Содержание flowIQ 3100 Series





































































Результаты поиска

Содержание flowIQ 3100 Series

Отзывы:

Kamstrup flowIQ 3100 Series, Техническое описание, Страница: 10 / 68

Результаты поиска

Содержание flowIQ 3100 Series

Отзывы: