Kamoer fluid tech(Shanghai)Co., Ltd. UIP WIFI User Manual
26
3.5.2 Ration mode copy function
The copy volume is used when the working volume that is running in the ration mode is
unknown. The principle is to fill the container to be filled, how much time (volume) is needed,
and then use this time to control the pump operation for filling;
Note: Prime the air in the pump tubing before copying.
1. Copy function entry:
Click to enter the ration mode copy function interface;
2. Copy volume:
When the copy function is running, the volume increases cumulatively;
3. Priming:
Before starting to copy, you need to empty the air in the pump tube. Click the prime
button to start the motor, empty the pump tube air, click the prime button again, and the pump
stops running.
4. Flow rate:
The ration mode flow rate is set in the ration mode setting interface;
5. Speed:
The ration mode speed is converted according to the ration mode flow rate setting;
6. Tube type:
the tube type of the ration mode, set in the ration mode;
7. Start/Stop:
Click to start copying, click again to stop copying;