Kamoer fluid tech(Shanghai)Co., Ltd. UIP WIFI User Manual
12
2.3 System settings
Figure 2-3-1 System Settings
a. Tube type setting:
tube type setting is used to calibrate different pump tubes;
b. Wi-Fi setting:
Click to set the Wi-Fi connection mode, which is divided into AP mode and
router mode. The AP mode is for the mobile phone to directly connect to the machine for control.
The router mode mobile phone and the machine are connected to the router, and the mobile phone
controls the machine through the router.
c. Language setting:
switch the language displayed by the machine, support Chinese and English;
d. Time setting:
click to set the real-time clock of the machine;
e. System information:
click to enter the display system information, including firmware version,
model number, serial number;
f. System self-test:
check whether the functions of the system are normal;
g. Restore factory settings:
click to restore the factory settings, after restoring the factory settings,
all parameters will be restored to the factory defaults;
h. Screen calibration:
Click to enter the screen calibration interface. In the screen calibration
interface, click the cross on the screen to complete the screen calibration.
2.4 Tubular calibration
When the accuracy of the pump is found to be reduced, the pump needs to be calibrated.
In the system setting interface, click the tube type setting -> select the tube type to be calibrated in
the pop-up tube type -> enter the tube type calibration interface: